DML-1500 Spiral Duct Machine manufacturers can be defined as, the whole process of air duct forming is completed by a machine independently.
1. The air duct production line can be defined as that the whole technological process of air duct forming is completed independently by a machine.
2, Chang cyclone pipe machine, before making the air duct, we should carefully understand the structure and specifications of the air duct on the guest paper, then dry when cutting the plate Hao into unnecessary waves
Cost, this is also a key step to reduce wastage.
3. The manufacturer of spiral air pipe machine finishes the heterosexual air pipe centralized and unified production, and tries to make the heterosexual pipe first, so that the remainder of the heterosexual air pipe production can be made
The large plates are all applied to the back straight pipe. ??
4. When the air duct is connected, the distance is as large as possible, especially the small branch pipe can be processed according to the length of the plate, which can save the waste of the auxiliary materials of the air duct
To speed up the progress of air duct production.
5. The edge material generated in the process of plate cutting should be applied to the top of the air duct as far as possible, and the upper level should not affect the air duct itself because of the concealment
It can be adopted.
Size standards ensure smooth and easy to clean pipe walls. Smooth, self-forming flange makes the pipe even, no longer use Angle steel flange, can be weighted pipe
Reduce more than 20%, therefore, can greatly reduce the building capacity, automatic spiral wind machine reduces the overall cost of the building.
1. The manufacturer of automatic spiral air pipe machine checks the pressure gauge every six months.
2. Allow the collected load to withstand 40mm of pain at a rated pressure of 500T. Excessive pain may cause the column to tighten or otherwise not
Phenomenon of good
3. If the whole machine of the automatic spiral air duct machine stops for a long time, it should be cleaned and coated with anti-rust oil
4. The oil industry was rigorously filtered before agreeing to participate in the fuel tanks
5. The working oil of the automatic spiral air duct machine is No. 46 anti-wear hydraulic oil, and the oil temperature is between 15 and 60 degrees Celsius when used.
